Victron Multiplus 24V/5000/70 5000W Inverter/Charger

The Victron Multiplus 48/5000/70 5000W Inverter/Charger, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

Available Victron Multiplus 48V Models: 500VA, 800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA


Up to 6 pcs of 48V 5kW Victron Multiplus can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have parallel, three phases,s, and split-phase capabilities. The Victron Multiplus 5000W has a three-phase capability. In addition to parallel connection, three Multiplus units of the same model can be configured for three-phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.


Monitor and control your Victron MultiPlus 48/5000-70-100 5kW 48V battery inverter charger (230V) and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto-starting a back generator and more.  When the Multiplus is connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.


In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multiplus is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

PowerControl – Dealing with limited generator, shoreside, or grid power: The Victron MultiPlus 5000W is a very powerful battery charger. It will therefore draw a lot of current from the generator or shoreside supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel, a maximum generator or shore current can be set. The 5kW (5000W) Victron MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.


The Victron MultiPlus 48/5000-70-100 5kW (5000W) 48V battery inverter charger (230V) will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.

Victron Multiplus 48/5000/70 5000W Inverter/Charger specs

Input Battery Voltage Range 38-66V
Nominal AC Output Voltage 230VAC
Continuous Power Rating 5000VA
Peak Inverter Efficiency 95%
Nominal DC Input Voltage 48V
Frequency Range AC Input 45-65Hz
Dimensions 444x328x240mm
Weight 30kg

Also check:

Victron MultiPlus 24V/3000VA/35A-50/230V Inverter/Charger

Victron Multiplus C 24/2000/50 2000W Pure Sinewave Inverter Charger