1000VA APC Smart-ups lcd Rack Mount 2Y 230V smc1000I-2U
1000VA LCD 230V APC Smart-UPS C SMC1000I
Output power capacity- 600Watts / 1.0 kVA
Max Configurable Power (Watts)-600Watts / 1.0 kVA
Nominal Output Voltage-230V
Output Voltage Distortion-Less than 5% at full load
Output Frequency (sync to mains)-50/60Hz /- 3 Hz
Topology- Line Interactive
Out of stock
1000VA APC Smart-UPS LCD RM 2U 230V SMC1000I-2U
Cold-start capable=Provides temporary battery power when the utility power is out.
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency-Reduces utility costs, generates less heat.
LCD Status Display Provides key UPS status at a glance.
Advantages of Using 1000VA APC Smart-UPS LCD RM 2U 230V SMC1000I-2U
Audible alarms; Provides notification of changing utility power and UPS power conditions
Predictive failure notification; Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification; Warns when a battery is not available to provide backup power.
User-replaceable batteries; Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test; Periodic battery self-test ensures early detection of a battery that needs to be replaced
Plug-and-Play external batteries; Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible; protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware; Install maintenance releases of firmware remotely using FTP.
LED status indicators; quickly understand unit and power status with visual indicators.
Serial connectivity; Provides management of the UPS via a serial port.
Network manageable; it provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible; Enables centralized management via the APC InfraStruXure Manager.
Smart Slot; Customize UPS capabilities with management cards.
Frequency and voltage regulation; Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning; Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible; Ensures clean, uninterrupted power to protected equipment when generator power is used.
The cold-start capability provides temporary battery power when the utility power is out.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.